Daily Times

The Focal Person of Sahiwal Coal Fired Power Plant has said that the clean and green environment of the power plant is evidence of its environmentally friendly nature.

The advanced technology being used at Sahiwal Coal Fired Power Plant enables it to produce clean energy, according to a press release.

The combustion of coal in the boiler produces the heat to convert water into high-pressure steam to rotate the turbines and ultimately rotate the electrical generator to produce electricity, along with ash and other gases like CO2, NOx, and SOx majorly, it further said.

Ash and these all gases are dangerous for the environment if they are not controlled. In the Sahiwal Coal Fired Power Plant, low NOx burner technology is being incorporated in the super-critical boiler. So, significantly less NOx is formed by reducing the peak flame temperature of burners in the boiler.

To control the effect of CO2, more than 50000 trees have been planted in the power plant and more trees are being planted under the Pakistan Prime Minister’s 10 billion Tree Campaign, the focal person further said.

After the combustion in the boiler, the flue gas is treated in ESP (Electrostatic Precipitation) and FGD (Flue gas desulfurization). The incorporation of ESP technology has enabled the Sahiwal coal-fired Power Plant to remove ash from the flue gas while the FGD technology to desulfurize the flue gas to a value that is far less than that of the standards set by the Punjab Environmental Protection Agency (PEPA) and even World Bank.

All the emission values of flue gas are monitored through a Continuous Emission Monitoring System (CEMS). The values are monitored and controlled by the operation engineers 24/7 a day.

The ash is removed from the flue gas with an efficiency of 99.9% in ESP. The ash is then dumped into the ash yard where the spraying water vehicle sprays water several times a day to keep the top surface of dumped ash wet so that it does not fly in the air to cause environmental pollution.